Xylene CP ��� Identification of Product
Chemical Code: CHE-X1
Chemical Name: Xylene
Chemical Grade: CP
Chemical Formula: C���H������
Chemical Weight: 106,17 g/mol
CAS No:
Chemical Synonyms: Xylene mixture of isomers
Xylene CP ��� Hazards Identification
REACH No: No Data Available
Signal Word: Danger
Supplemental Hazard Information:
Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher
Xylene CP ��� Hazards statements
H226 ��� Flammable liquid and vapour.
H304 ��� May be fatal if swallowed and enters airways.
H312 + H332 ��� Harmful in contact with skin or if inhaled
H315 ��� Causes skin irritation.
H335 ��� May cause respiratory irritation.
H373 ��� May cause damage to organs through prolonged or repeated exposure.
Xylene CP ��� Precautionary statements
P210 ��� Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
P260 ��� Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P280 ��� Wear protective gloves/ protective clothing.
P301 + P310 ��� IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P331 ��� Do NOT induce vomiting.
P370 + P378 ��� In case of fire: Use dry powder or dry sand to extinguish.
Xylene CP ��� Composition of Chemical
Chemical Formula: C���H������
EC No 1272/2008: No Data Available
Xylene CP ��� First Aid Measures
General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If: Skin Contact: Wash off with soap and plenty of water. Consult a physician.
If: Eye Contac: Flush eyes with water as a precaution.
If: Swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth withwater. Consult a physician.
Important Symptoms: The most important known symptoms and effects are described in the labeling section.
Immediate Medical Attention: No Data Available
Firefighting Measures
Extinguishing Media: Suitable extinguishing media: Dry powder, Dry sand. Unsuitable extinguishing media: Do NOT use water jet.
Hazards Arising: No Data Available
Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Info for Firefighting: Use water spray to cool unopened containers.
Accidental Release Measures
Personal Precautions: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Enviromental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Method for Containment: Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations.
Handling and Storage
Personal Precautions: Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition ��� No smoking.Take measures to prevent the build up of electrostatic charge.
Enviromental Precautions: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in cool place.
Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)
No Data Available
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/Face Protection: Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Full contact
Material: Fluorinated rubber
Minimum layer thickness: 0,7 mm
Break through time: 480 min
Material tested: Vitoject�� (KCL 890 / Size M)
Splash contact
Material: Fluorinated rubber
Minimum layer thickness: 0,7 mm
Break through time: 480 min
Material tested: Vitoject�� (KCL 890 / Size M)
Data source: KCL GmbH, D-36124 Test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection: Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Physical and Chemical Properties
Appearance: Clear, colourless liquid
Odour: No Data Available
Odour Threshold: No Data Available
pH: No Data Available
Melting Point: < 0 ��C
Boiling Point: 137 ��� 140 ��C ��� lit.
Flash Point: 25 ��C ��� closed cup
Evaporation: No Data Available
Flammability: No Data Available
Upper/Lower Flammability or Explosive Limits: Upper explosion limit: 7 %(V) Lower explosion limit: 1,1 %(V)
Vapour pressure: 24 hPa at 37,70 ��C
Vapour density: 3,67 ��� (Air = 1.0)
Relative density: 0,86 g/mL at 25 ��C
Water solubility: No Data Available
Partition Coefficien: No Data Available
Auto-ignition Temperature: No Data Available
Decomposition Temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidizing properties: No Data Available
Other Safety Info: Relative vapour density 3,67 ��� (Air = 1.0)
Stability and Reactivity
Reactivity: No Data Available
Chemical Stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No Data Available
Conditions to Avoid: Heat, flames and sparks
Incompatible Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Hazardous decomposition products formed under fire conditions. ��� Carbon Oxides.
Other decomposition products ��� No Data Available
Toxicological Information
Acute Toxicity: No Data Available
Skin Corrosion/Irritation: No Data Available
Serious Eye damage | Eye Irritation: No Data Available
Cell Mutagenicity: No Data Available
Carcinogenicity: IARC: 2B ��� Group 2B: Possibly carcinogenic to humans (Ethylbenzene).
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity ��� Single Exposure: No Data Available
Specific Target Organ Toxicity ��� Repeated Exposure: No Data Available
Aspiration Hazard: No Data Available
Ecological Information
Ecological Toxicity: No Data Available
Ecological Persistence and degradability: No Data Available
Bioaccumulative Potential: No Data Available
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other Adverse Effect: Toxic to aquatic life.
Disposal Considerations
Waste Treatment Methods: Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing
with other waste. Handle uncleaned containers like the product itself.
Contaminated packaging
Dispose of as unused product.
Transport Information
UN Number: ADR/RID: 1307
IMDG: 1307
IATA: 1307
UN Shipping Hazard: ADR/RID: XYLENES
IMDG: XYLENES
IATA: Xylenes
Transport Hazard Class: ADR/RID: 3
IMDG: 3
IATA: 3
Packaging Group: ADR/RID: III
IMDG: III
IATA: III
Enviromental Hazards: ADR/RID: no
IMDG Marine pollutant: no
IATA: no
Special Precautions: No Data Available
Regulatory Information
Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006
Chemical Safety Assessment: For this product a chemical safety assessment was not carried out.
Additional Info: RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
Disclaimer
The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product���s
properties. RLS Chemicals and its Associates shall not be held accountable for any damage���s consequent of handling the above product.
Add to Wishlist
Add to Wishlist
Related products
Other
Other